Working with companies that would benefit from firmware and software services.
We deliver our embedded software and firmware services across a wide range of industries, such as:
We frequently work with connected products. Typically there will be a sensor, some sort of data transmitter, and often a battery. This device sends data to the Web, where it is stored in a database and retrieved on demand. Customers may require us to deliver all or part of this capability.
IoT is characterised by high complexity. We have helped a number of customers get their designs off the ground. We use our in house testing tools to verify the designs work as required. We worked with a radio sensor company to develop remote sensors for public spaces – people counting, air quality and car counting, to name but three.
A major challenge was battery life, so we designed an energy efficient communications system to allow hundreds of sensors to update through a single internet connection. Without security the data is worthless, so the radio network is private and we use SSL to communicate around the Internet. Data should be end-to-end encrypted before leaving the controller, and all the way through to the destination. Our testing can prove all of these.
Bermondsey Electronics Limited is a highly experienced embedded system design house. Active in sectors that include aerospace, automotive, security, fitness and leisure, the company’s design and verification services shorten and de-risk product launches. These embedded engineering services also enable customers to go to market with increased confidence in their products; assured that they have been completely functionally verified.
Sometimes we test because product quality demands it, but other times we test because there is a regulatory requirement. Each customer knows where they lie on this spectrum.
For customers who require product quality, we prove the product performs as required (e.g. that a BLE device has enough bandwidth). For customers who require regulatory approval, we prove the specific conditions of the test are met (e.g. that a medical product does no harm during the course of treatment). Regardless of the motivation, our testing proves that your product causes minimal unintentional harm or loss.
Our motivation is proving your product works as required, under the specific conditions you require. Working in regulated industries always adds the challenge of conformity within those industries. We are here to reassure you that products can be delivered in these conditions, in a controlled and predictable manner. We are you partner to create software, which is resilient, safe, secure and behaves predictably under a wide range of conditions.
For those customers who need it, we can trace our test report outcomes back through the software design document and the test plan, all the way back to your original requirements
Modern regulation requires consideration of failure modes during conception, design and production. We can partner with you at each of these stages to prove compliance.
We are able to consider the risks of action, or inaction, as suitable to your product. We consider the risks at each stage of development to ensure your product is as safe as it needs to be.
We agree requirements with you and write them back so you know we understand them.
We write this first in order to fully scope out the work required. This keeps us on track at all times.
We do the work, testing as we go and will provide you with a test report when ever you require one.
We supply the code and test report for your review and approval. You can then reproduce the test report by following the same method.
Don’t take our word for it, these are kind words from our customers
The Bermondsey Electronics team investigated all the options and understood the complexity of our problem and how dangerous it was for our workforce. We’d already tried to have our product fixed many times and our other providers had deemed it unfixable. Their solution enabled us to finally fix the product and as a bonus, they also reduced the time requirement, cost and complexity of installation.
Peter’s team were professional and easy to work with. They understood our challenges and helped us overcome them. Their technical expertise enabled us to solve the difficulties we were experiencing. We valued their support and have since built a productive working relationship with them.
We worked with Bermondsey on a mission-critical project for us, and Peter and his team were instrumental in its success. They worked quickly, and methodically, and produced sophisticated, neat solutions. I can’t recommend them enough!
“They worked quickly, and methodically, and produced sophisticated, neat solutions.”
Verify that your product’s software and hardware are functioning together as intended using the BELIeVE integration verification engine. Please view our use cases to demonstrate the depth and breadth of available testing.
Standard test-driven
development
C, C++, Embedded C,
Java and Python
Linux, Android,
FREERTOS and Zephyr
If you have questions about how we can help your business please complete the form below and we will be in touch shortly.
Alternatively, please call us on +44 (0)208 0650 162
Email : [email protected]
Bermondsey Electronics Ltd. is registered in
England and Wales. Registered number: 10524932
VAT Number: 259290869 Registered ofice: Unit
B.505, The Biscuit Factory, 100 Drummond Road,
London SE16 4DG, United Kingdom
© Bermondsey Electronics Ltd 2017-2023
FREE 30 Minute Consultation
Do you have a product under development that must function exactly as intended and exhibit high reliability in the field?
If so, we can help.